Thursday May 10, 2018


Maplesoft announces that it has joined the Rockwell Automation Encompass™ Product Referencing Program

Partnership will help joint customers reduce development risk and associated costs

Waterloo - Maplesoft announced it has been named an Encompass Product Partner in the Rockwell Automation PartnerNetwork™ Program. Through the partnership, joint customers of Rockwell automation and Maplesoft will benefit from technology that provides model-based tools for virtual commissioning. Using Maplesoft technology, customers are able to reduce costly integration problems through the development of high-fidelity, high-performance Digital Twins of their machines.

Integrating these Digital Twins with Studio 5000® from Rockwell Automation allows customers to predict dynamic loads on machine actuators, helping them to make much better-informed decisions on motor sizing, eliminate undesired dynamic effects, and maximize machine performance. It also helps customers reduce the costly integration problems typically associated with the first prototype of the machine, which reduces associated development costs. Model-driven Digital Twins, less expensive than traditional data-driven Digital Twins, assist in all stages of product design and are essential for virtual commissioning.

The capabilities provided by this partnership are based on MapleSim and associated professional services to ensure a rapid return on investment. MapleSim, the system-level simulation software from Maplesoft, is used across a wide variety of applications and industries. Because Digital Twins in MapleSim do not require test data to predict behavior, they can be used for conceptual design as well as to validate product performance, design changes, and diagnostics. Designers can test integration in a virtual commissioning phase, correcting issues that typically would not be discovered until after production.

“Too often, the first time machine manufacturers encounter problems with their design is during the hardware integration phases, when it is very costly to address and risks disruption to the schedule,” said Paul Goossens, Vice President of Engineering Solutions at Maplesoft. “Building a digital twin of the machine within the Rockwell Automation platform - complete with mechanisms, motors, gearing and controllers - very early in the process, allows our customers to test the design through multiple duty cycles. This helps them to identify and address integration issues at a fraction of the cost of dealing with them in the later stages.”

“Our customers will benefit tremendously from this partnership,” said Andrew Stump, Software Business Manager at Rockwell Automation. “Integration with the Studio 5000 design environment allows customers to improve the entire design process of their systems and ‘right size’ their components. These more comprehensive digital twins, combined with model and control system execution, help users to improve the products their own customers are demanding, with features such as smart diagnostics, performance optimization, and machine-life prediction.” is distributed twice weekly; Tuesday and Thursday

Not a Subscriber? Receive more articles on business issues
Sent directly to your email in-box.

contact us

Publisher is Exchange Business Communication Inc.
No part of this article may be reproduced without written permission from the publisher.
Email Publisher

ISSN 0824-45
Copyright, 2018

Share Your Story: pressrelease @
Expand Your Reach:
advertise @
Publisher: Exchange Business Communication Inc., PO Box 248, Waterloo, Ontario, Canada
Email Editor

Content published on this site represents the opinion of the individual, organization and/or source provider. is a online daily journal of Exchange Business Communication Inc. (1997) Publishers of Exchange Magazine est. 1983. Privacy Policy. Copyright of Exchange produced editorial is the copyright of Exchange Business Communications Inc. 2018. Submitted editorials, comments and releases are copyright of respective source(s).